KROHNE BATCHFLUX 5015 K EN - Manual (Page 17)

Installation and operating instructions 17 BATCHFLUX
Part B IFC 015 signal converter
4 Operator control of signal converter with
HHT 010 (option)
4.1 Operator control concept
Please note!
Do not open the housing of the BATCHFLUX IFM 5015 K.
Danger of contamination with substances likely to destroy the moisture barrier of the electronic
equipment (e.g. if CIP or SIP cleaned from the outside).
Therefore, please contact your KROHNE Service engineer before you open the housing.
Menu column Function column Data column
3.5 USER UNIT
3.4 ENTRY CODE
3.3 ZERO SET
3.2 FLOWMETER
3.0 INSTALL. 3.1 LANGUAGE
2.2 HARDW. INFO
2.0 TEST 2.1 TEST Q
1.7 IND.OUTP. S
no
HARDWARE!
1.6 PULS.OUTP. P
1.5 CUR.OUTP. I
no
HARDWARE!
1.4 DISPLAY
1.3 L.F.CUTOFF
1.2 TIMECONST.
1.0 OPERATION 1.1 FULLSCALE
See
Sect.
4 + 5
Direction of movement ↑ ↓ ↑ ↓
↵
→
↵
→
Measuring mode
1 3 6 . 4 9
m 3 / h r
→
CodE 1
When this displayed, press following
keys:
→ → → ↵ ↵ ↵ ↑ ↑ ↑
4