KROHNE OPTIWAVE 5200 PROFIBUS - Manual (Page 3)

SAFETY INSTRUCTIONS
1
3
OPTIWAVE 5200 C
www.krohne.com 10/2013 - 4003066901 - MA OPTIWAVE5200C-PA-R01-en-
1.1 Installation
Install the GSD files in your system. If it is necessary to use the process control system to change
the settings of the device, install the DD files. If it is necessary to use PACTware™ to change the
settings of the device, install PACTware™ and the DTM PROFIBUS PA files.
The software, files and installation instructions are given on the DVD-ROM supplied with the
device. You can download the latest version of PACTware™ and the DTM PROFIBUS PA from our
website. For more data, refer to the “readme.txt” files.
1.2 Scope of the document
These instructions are supplementary to the standard product documentation of the signal
converter. The details described herein, in particular the safety information, are valid and shall
be adhered to. The present supplementary instructions provide additional information for the
device when it is connected to a PROFIBUS network.
1.3 Scope of delivery
A device for PROFIBUS communication is supplied with:
Supplementary instructions for the PROFIBUS PA interface (this document)
INFORMATION!
The information in this document only contains the data applicable to the PROFIBUS module.
The technical data in the signal converter Handbook is valid in its current version, provided that it
is not rendered invalid or replaced by these supplementary instructions.