Instrument layout – KYORITSU 2434 User Manual
Page 4
Measuring method:
Dual Integration
Display:
Liquid crystal display with maximum reading
of 3999
Low battery warning:
"BATT" mark appears on the display
Overrange Indication:
"OL" appears on the display when upper limit
of measuring range is exceeded
Response Time:
Approx. 2 seconds
Sample Rate:
Approx. 2.5 times per second
Accuracy-insured
23℃±5℃, relative humidity 85% or less
Temperature and
(without condensation)
Humidity Ranges:
Operating Temperature 0-40℃, relative humidity 85% or less
and Humidity Ranges:
(without condensation)
Storage Temperature
-20-60℃, relative humidity 85% or less
and Humidity Ranges:
(without condensation)
Power Source:
Two 1.5V R03 (UM-4) batteries
Current Consumption:
Approx. 4mA
Measurement Time:
Approx. 150 hours
Sleep Function:
Automatically powered down in about 10
minutes after the last switch operation
Safety Standard:
IEC 61010-1, IEC 61010-2-032
over-voltage CAT.Ⅲ 300V, pollution degree 2
IEC 61326 (EMC)
Overload Protection:
120Arms max. for 10 seconds
Withstand Voltage:
3700Vrms (50/60Hz) for 1 minute between
metal part of transformer jaws and housing
case (except transformer jaw case)
Insulation Resistance:
10MΩ or greater at 1000V between metal
part of transformer jaws and housing case
(except transformer jaw case)
Conductor Size:
Approx. 28mm in diameter max.
Dimensions:
169(L)×75(W)×40(D)mm
Weight:
Approx. 220g including batteries
Accessories:
Two R03 (UM-4) batteries
Carrying case Model 9052
Instruction manual
Optional Accessories:
Multi-Tran Model 8004 and 8008
4. INSTRUMENT LAYOUT
Transform Jaws
Trigger
Range Selector Switch
Hand Strap
Display
Frequency Selector Button
Data Hold Button
●ＬＣＤ
Low Battery Warning
Frequency Response :
Wide
Frequency Response :
50/60Hz
Data Hold Indication
Unit