KYORITSU 6310 Quick Manual - Manual (Page 19)

− 17 −
６．
Integration value measurement
Steps for measurement
Ensuring your safety
↓
Preparation for measurement
↓
Setting
↓
Wiring
↓
Integration value measurement Range
* Readings are displayed right after the recording of integration value measurement starts.
Symbol displayed on the LCD
WP+
Active electric energy
(consumption)
WS+
Apparent electric energy
(consumption)
WQi+
Reactive electric energy
(lagging)
WP-
Active electric energy
(regenerating)
WS-
Apparent electric energy
(regenerating)
WQc+
Reactive electric energy
(leading)
Switching displays / Viewing W Range
Select
a system
Cursor Key
Select
a channel
Cursor Key
* Press F2 Key to switch on the displays for Wh Range and W
Range.
Save data
File ID : 6310-02
Saved time & date ELAPSED TIME
Active Power energy
(consumption /
regenerating )
Apparent Power energy
(consumption /
regenerating )
Reactive Power energy
(consumption /
regenerating )
DATE TIME ELAPSED TIME INTEG_WP INTEG_WS INTEG_WQ
yyyy/mm/dd h：mm：ss h：mm：ss (±)x.xxxxxE±nn
year/month/ date hour:min:sec hour:min:sec (±) value x 10 ±n
* Reactive power (consumption :+ / regenerating :- ) will be recorded with phase information: lagging (i) or leading (c).
* At Wh Range, data measured at W Range and above measurement data are recorded at the same time.
KEW6310
Integration value measurement KEW6310
Range
Basic Setting Measurement setting Save Setting
Wiring Interval Recording method
V Range Save item (Wh) Recording start
VT Ratio ・Inst value Recording termination
Clamp Sensor ・Avg value Destination to save data
A Range ・Max value Destination to save screen shot
CT Ratio ・Min value
Filter ・Details
DC V
Frequency
Display for
Wh Range
Display for
W Range