Metex 2200C Conductivity Analyzer/Controller User Manual
Page 7
Advertising
Model 2200C
Page 5
CAUTION: Connecting the line voltage to incorrect terminals may cause serious damage.
3.5 Cell Connections
3.5.1
Connect the 4 wires of the cell cable to the TB2 terminal strip on the main circuit
board being sure to match the colors as printed on the TB2 terminal strip. White
and black are the electrode wires; red and green are the temperature sensor wires.
Place switches S41 and S42 in the down “on-line” position. Refer to Fig.2
Advertising