Precision Control Systems StripIR 4185 - Manual (Page 8)

Safety
The Model 4185 Strip Heater is designed for safe operation. Nevertheless, installation,
maintenance and operation of the heater can be dangerous for a careless operator or
maintenance person. For your safety and the safety of others, please read the
instructions in this INSTRUCTION MANUAL and follow these safety practices that will
help to prevent accident or injury.
CAUTION!
Parts of the heater may exceed 500°F (260°C). Contact with the lamps, reflectors, or
metal parts near the lamps may cause severe BURNS.
WARNING!
There is danger of electrical shock when servicing the heater.
CAUTION!
2-1
Section 2
Continuous exposure to high intensity infrared radiation at close proximity could be
harmful to eyes or skin. Although infrared lamps are not emitting ultra violet
electromagnetic radiation, harmful burns could still result if an operator is in close
contact with lamps being operated at high intensity.
Because of the brilliant light emitted by infrared lamps at full intensity, it is
recommended that the eyes be shielded from the glare if observing the lamps or
radiant heat chamber for an extended period of time. Use suitable shaded lenses or
dark glasses.
NEVER place hands under the heating elements.
ALWAYS allow heating element to cool at least 5 minutes before touching the
lamps or adjacent parts.
Observe that all applicable local and national electrical codes are met and a safe
electrical ground system is installed before attempting to operate the heater. Refer
to the Section 3 for proper installation procedures.
GENERAL
INFRARED
RADIATION
HIGH
TEMPERATURES
ELECTRICAL
SAFETY