Pyromation Precision Tip Re-Adjustable Melt Bolt Thermocouple - Manual

Quality in Every Degree
®
INSTALLATION GUIDE
Precision Tip Re-Adjustable
Melt Bolt Thermocouple
PRODUCT DESCRIPTION
Pyromation’s Precision Tip Re-Adjustable Melt Bolt Thermocouple is designed to
accurately measure a temperature profi le of varying depths across a plastic melt
stream. The tip resists bending during start up and during maximum operating
conditions and has a positive shut off to eliminate the backfl ow of plastic into
the bolt. The sensor can be completely retracted from the extruder head while
remaining installed. The re-adjustable design provides complete fl exibility in
installed sensor placement. Graduated markings on the sensor indicate varying
depths for ease of use and placement repeatability.
SPECIFICATIONS
THERMOCOUPLE: 22 AWG Magnesium Oxide (MgO) Insulation
JUNCTION TYPE: Exposed Standard
TEMPERATURE RATING: 900 F
BOLT: 3” or 6” Stainless Steel with 1/2”-20UNF 2A x 1 7/8” Threads
IMMERSION RANGE: 0” to 1”
TERMINATION: Standard Plug with Optional Mating Connector
ADJUSTING SCREW: Positive stop prevents disengagement during maximum
operating conditions. Graduated markings appear at 1/8” increment.
Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com
1 of 2 Melt-1
© Copyright 2005 Pyromation, Inc., All Rights Reserved.