Revo R4-8DVR4 - Manual (Page 14)

User’s Manual
8
ZOOM Button
Pressing the ZOOM button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing
what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.
PTZ Button
Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made during system setup. This
button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode (8-ch model only).
ALARM Button
Pressing the ALARM button resets the DVR’s outputs including the internal buzzer during an alarm.
PTZ Control Buttons
While in the PTZ mode, the PRESET buttons are used to save Presets and load a Preset View, the ZOOM buttons are
used to Zoom In and Zoom Out, and the FOCUS buttons are used for Near Focus and Far Focus.
BACK UP Button
Pressing the BACK UP button allows you to copy video clips.
CALENDAR Button
In the search mode, pressing the CALENDAR button displays the Calendar Search screen.
TURNING ON THE POWER
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 30 seconds to initialize.
As soon as the DVR’s initialization process completes, you might have the DVR’s internal buzzer sound if not all
cameras (8 and 4 cameras for 8- and 4-channel DVR respectively) are installed to the DVR because the DVR is set to
use all camera channels by default. To turn the internal buzzer off, press the ALARM button on the remote control, or
move the mouse pointer to the top of the screen and click the (Alarm) icon.
When you turn the system on for the first time, you will be asked to select the
startup language. Select the desired language and then click the OK button.
NOTE: You can change the language during System setup. Refer to the
Advanced Setup section of this chapter.
Before using your DVR for the first time, you will want to establish the initial settings. The following describes how
to use the remote control and mouse in the setup screen. Take a minute to review the descriptions.