Revo R4-8DVR4 - Manual (Page 41)

4 & 8 Channel Digital Video Recorder
35
Search
Go To
Export
Camera Menu
Alarm
Panic
Exit
NOTE: The menu icons also can be displayed by moving the mouse pointer to the top of the screen.
Search: Selects video from the event log, searches using a recording table or searches motion events (see below
for more details).
Go To: Displays the first or last recorded image, or searches by date and time (see below for more details).
Export: Copies a video segment and saves it (see below for more details).
Camera Menu
 Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of the selected camera
on the screen. Selecting the (Exit) icon at the top of the screen by pressing the MENU button on the remote control
or moving the mouse pointer to the top of the screen exits the Zoom mode. While in the Zoom mode, the icon
displays on the camera screen if Zoom is selected in the Display setup screen (OSD tab).
 Audio: Selecting Audio while in the full-screen mode toggles playing recorded audio On and Off. While playing
recorded audio, the icon displays on the camera screen if Audio is selected in the Display setup screen (OSD tab).
 Enable De-Interlace: Selecting Enable De-Interlace while in the full-screen mode turns the de-interlace filter on.
NOTE: The video signal has a time difference of 1/60 second between odd and even fields because it is
composed of 60 interlaced fields per second. When recording video with Very High (D1) resolution, video is
made up of frame units combining two fields – one odd field and one even field. This can cause horizontal scan
lines or flashes in areas with motion because of the time difference between the two fields. Turning on the
de-interlace filter provides clearer video by eliminating these horizontal scan lines and flashes.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.
 Edit Group: Selecting Edit Group supports the active cameo function. (8-ch model only)
Select Edit Group and choose a camera that you want to change the display position (e.g.,
Camera A). Then, click the right mouse button to display the menu. If you choose another
camera in the menu (e.g., Camera B), the screen displays Camera B instead of Camera A.
Clicking the right mouse button and selecting Exit Group Edit in the menu exits the Active
Cameo mode.
Alarm: Resets the DVR’s outputs including the internal buzzer during an alarm. Selecting the icon is the
same as pressing the ALARM button on the remote control.