Revo REJCPTZ-2 - Manual (Page 9)

PTZ Camera Control command Index
Control of a PTZ camera:
All directions on the joystick are functional
Pressing the Control key acts as a turbo mode, momentarily speeding
up the camera’s pan and tilt functions
P/T right or left:【Joystick】move to right or left
P/T up or down:【Joystick】move up or down
Lens Zoom:【Joystick】twist counterclockwise or clockwise
Lens Focus:【SHIFT】+【Joystick】move to left or right
Lens Iris:【SHIFT】+【Joystick】move to up or down
Set preset:【#】+【SHIFT】+【PRESET】
Call preset:【#】+【PRESET】
Clear preset:【#】+【SHIFT】+【CANCEL】, then select 【OK】
to clear preset
Run Auto Scan:【#】+【AUTO】
Run Tour:【#】+【TOUR】
Run Pattern:【#】+【SHIFT】+【MENU】
On Command:【#】+【ON】
Off command:【#】+【SHIFT】+【AUTO】
NO. + PGM+ Tour:【#】+【SHIFT】+【TOUR】
NO. + PGM+ Scan:【#】+【ESC】
When Data is 0000,
Press【PRESET】to enter Preset menu
Part II
Installation, Connection and Setting
■Accessories
■Size
■Introduction
■Power On
■Keyboard Hints
Installation, Connection and Setting
Before installation, please check to see that all accessories are present. If not, contact
your supplier.
Accessories:
Keyboard: 1 unit.
Power supply: 1 unit (AC110/220V input DC12V/1000mA output).
Testing cable: 1 piece (Two wires for (“A” or “+”) and (“B” or “-“) connections.)
User Manual: qty. 1
4 15