Revo REXT650-1 - Manual (Page 8)

- 2 -
CAMERA CONNECTIONS
2
1
REMINDER:
Never aim the
camera directly
into the sun.
1. Color Lead Wire & Color Display Label
2. Video : BNC connector used to connect the camera to a monitor, switcher, etc.
COLOR
BLACK
RED
BLUE
BROWN
DESCRIPTION
AC24V
AC24V
RS485(-)
RS485(+)
COLOR
BLACK
WHITE
ORANGE
BROWN
DESCRIPTION
DC12V
DC12V
RS485(-)
RS485(+)
1. Use fasteners of appropriate size and type to attach the bracket to the wall surface.
Position the housing so that it allow for viewing of the selected area.
2. Adjust the movable arm of the wall bracket to attain the desired position. One it is in place,
tighten the bolt located at the pivot point of the movable arm.
3. If you want to pull out the relevant cable, remove the knockout on the wall bracket mounting.
1
2
3
WALL BRACKET MOUNTING