Revo REXT650-1 - Manual (Page 9)

- 3 -
CAMERA OVERVIEW
REAR VIEW
2 3 4 6
1
5
10
7
8
9
Left Button
Up Button
Enter Button
Right Button
Down Button
Day/Night External I/O
Motion ALARM OUT
RS - 485
UTP(optional)
Power Indicator
Video Output Connector (BNC)
UTP or BNC Transformation Switch (optional)
AC/DC Compatible Input Terminal 1
2
3
4
5
6
7
8
9
10
CAMERA ADJUSTMENT
<White Balance>
1) Auto(Auto White Balance) : AWB mode (1800ºK ~10500ºK)
2) Push/Hold : Push&Hold Mode.
 To find the Optimal setting for the current luminance environment in this mode, set the
direction towards a sheet of white paper and select Hold and press enter button. If the
environment changes, readjust it.
3) CRS Mode(Color Rolling Suppression) : Decrease color rolling effect.
 This operation take some time about 10 seconds and user can stop this operation by
pressing enter button.
 When CRS Mode is on, color tone can be weak.
4) Indoor : Set color temperature to indoor (3200ºK)
5) Outdoor : Set color temperature to outdoor (6300ºK)
6) FL(Fluorescent Light) : Set color temperature to fluorescent light fixed gain.
7) User(User Set White Balance) : Adjust red or blue gain.
 R(R-GAIN):Adjust R-GAIN value (0-255)
 B(B-GAIN):Adjust B-GAIN value (0-255)
<Auto Exposure>
1) SHT(s)(Electronic Shutter) : Select Shutter mode.
 Auto(1/60(1/50) ~ 1/100,000 Auto run, Manual 8 step from 1/60(1/50) ~1/10,000).
2) FLC(Flicker-less) : Flicker-less On/Off.
3) AGC(Auto Gain Control) : AGC Gain(Off, Low, Middle, High)
4) Sens-Up(Slow Shutter) : Maximum Low-Shutter select. (x2-x32 and Off)
5) Offset Add : Force the picture to turn up at low luminance environment.
<BLC/WDR>
1) Normal AE : BLC/WDR function off.
2) WDR(Wide Dynamic Range) : Wide dynamic range mode on.