Revo REXTZ22-1 User Manual
Page 18
4.2.7 SPECIAL
SYNC
Select internal or line lock mode. (DC power is internal sync only)
PHASE
Adjust sync phase in line lock mode.
D/N MODE
Select D/N, Color, BW.
D/N DELAY
Adjust the working time of the filter when D/N operated.
(5,10,20
sec)
HI-RES
Select high resolution mode. (LOW/MID/HIGH)
2DNR
Select 2D noise reduction level. (OFF/01~07)
3DNR
Select 3D noise reduction level. (AUTO/01~28)
AUTO : If the motion is detected, DNR level becomes lower
automatically so "ghost" is decreased, on the other hand, noise will
be increased. On the opposit, if there is no motion, DNR level is
raised and noise will be decreased
WHITE DET
Press the Menu key to execute the White Pixel Detection function
and then the Iris will be closed automatically. When detection is
completed, the operation automatically returns to the normal state.
LEVEL
Adjust the threshold level from 1 to 15. (Default is 4)
NIGHTLIGHT
Select IR options. IR/NEAR, IR/ALL.
4.2.8 EFFECT
SHARPNESS
Adjust sharpness of outline. (0~15)
18