Satechi Swift Bluetooth Portable Speaker System - Manual (Page 2)

- Voice transfer: During a call, press and hold the MFB for about 3 seconds until a beep is heard from the
speaker. The call will be transferred from the speaker to your phone or vice versa.
- Muting: Mute the built-in microphone by double pressing the MFB.
- Support for A2DP / No support for AVRCP: Some phones may not support Bluetooth AVRCP which
allows some of these MFB functions to perform; Bluetooth A2DP only allows for audio to be transmitted.
SPECIFICATIONS
- Bluetooth Specification: v3.0 Class 2
- Bluetooth Profiles supported: HSP v1.2, HFP v1.5, A2DP v1.2
- RF Frequency Range: 2.402 – 2.480GHz, 2.4G ISM Band
- Radio Performance: Receive Sensitivity of -90dBm, TX Power Max 4dBm
-
Wireless Range: up to 32’
- 2W Speaker Output Level: 80dB @0.5m
- Built-in noise cancelling Microphone
- Rechargeable 400mAh Li-Polymer Battery
- Charging Adapter Output: DC 5V
– 200mA
- Nominal Charging Time : 2 hours max
- Talk Time: Up to 4 hours
- Playback Time: Up to 3 hours
- Standby Time: Up to 300 hours
- Operating Tempterature: 14°F ~ 122°F
- Storage Tempterature: -4°F ~ 176°F
TROUBLESHOOTING
If you cannot connect the speaker to your phone, try the following:
- Ensure that the speaker is charged, switched on, paired and connected to your phone.
- Ensure that the Bluetooth feature is activated on your phone.
- Ensure that the speaker is within 30 feet of your phone and that there are no obstructions between the
headset and the phone, such as walls or other electronic devices.
If no pairing is made over a period of time, the Bluetooth speaker will retreat from pairing mode. You have to
turn the speaker off and start over.
BATTERY INFORMATION
The speaker is powered by a rechargeable battery. The full performance of a new battery is achieved only
after two or three complete charge and discharge cycles. The battery can be charged and discharged