Techne TC-5000 User Manual
Page 50
Advertising
49
Date: The date can be corrected by the user by using the numerical interface shown above.
Time: The time can be corrected by the user by using the numerical interface shown in above.
Auto restart: This allows a program to be re-started in the event of a power failure when the instrument
is in the middle of running a program. The options are Enabled or Disabled.
Baud Rate: This is the speed of communication between the thermal cycler and a computer. The rate can
be selected from the range of 300 to 38400 depending on individual requirements.
Advertising