Thermo Fisher Scientific Alpha CON 100 - Manual (Page 12)

9
4.2 Setting the Controller Range (Software)
At the measurement mode, press
both ▲ and ▼ keys simultaneously
until the “CLr” display shows. Press ▲
or ▼ key to select the appropriate
Conductivity measurement range.
Press ENTER key to confirm.
Value scrolls from uS to mS, indicating
the measurement range or
uS/mS
MODE
ENTER
CLr
uS/mS
MODE
ENTER
999
uS/mS
MODE
ENTER
1.0
uS/mS
MODE
ENTER
uS
uS/mS
MODE
ENTER
100
Cell Constant either 0.1 or 1.0 blinks
when the 999 uS range is selected
uS/mS
MODE
ENTER
nnS
uS/mS
MODE
ENTER
100