West Control Solutions DataVU 5 - Manual (Page 13)

13
2 Device description
Status line The status line is shown in the top section of the display. It provides
information on important actions and states. The status line is always visible,
irrespective of the level (operation, parameters, configuration).
Time & Date
Display of the current time
and date
The egg timer appears whenever the instrument cannot be
operated because it is busy.
The “H” indicates that the measurements which are displayed
are derived from the past (history). The display shows
the data saved in the FLASH memory.
If a fault occurs, an “i” will flash in this position.
In the device info window (
v Chapter 3.7 “Device info”)
you can ask for the cause of the fault.
If the keys are inhibited, a key will flash in this position.
Alarm
If an alarm occurs (e.g. out-of-limit), the bell (alarm) will flash in this field.
Shows the last entry in the event list
Instrument name (maximum 16 characters).
Present diagram speed
Background color:
gray = normal operation,
blue = timed operation,
orange = event operation
CF card / internal memory
Shows the free storage of the CompactFlash card or the internal memory, as
a percentage. In the event of a “memory alarm” or a fault on the CF card, the field is
shown with a yellow background and the symbol will flash. The error message
can be checked in the CF card menu (Chapter 3.6 “CompactFlash card”).
Storage capacity of the CF card
Available internal memory for read-out via CF card
(the diagram shows a turquoise-colored memory chip)
Available internal memory (for read-out via interface)
(the diagram shows a dark blue memory chip)