Aleco RD-175 - Manual (Page 3)

Hardware Housing Screws
1/2” x 1/4  20 (2)
Hardware Housing
Top Mounting Angle
Jamb Guard
Top Angle Mounting
Screws 3/4” x 1/4  20 (6)
Plumb Adjustment Screw
3/4” x 1/4  20 (2)
Hardware
Set Screws
1” x 1/4  20 (2)
Door
Jamb Guard
Mounting Screws
3/4” x 1/4  20 (6)
Slide Hardware Cover
over Mounting Angle
Insert
Pivot Pin
Step
2
Door Installation
2.1 Position the door in the doorway and slide
the bottom pivot pin into the hole in the
jamb guard.
2.2 Slide the top hardware housing onto the top
angle bracket, as shown.
2.3 Insert the hardware housing mounting screws
into the two holes at the corners of the hardware
cover to secure the door to the mounting angle.
Step
3
Adjustments
On Next Page
See