Aiwa CSD-TD55 - Manual (Page 10)

• Use Type I (normal) tapes only.
• The unit plays (records on) the side facing up.
PLAYBACK
1
Press TAPE.
The power is turned on.
2
Press PUSH EJECT to open the cassette
holder and insert a tape with the side to
be played facing out and the exposed
side facing down.
PUSH EJECT
Press PUSH EJECT to close.
3
Press e PLAY/PAUSE to start
playback.
TAPE OPERATION
C
10
ENGLISH
Tape counter
To set the tape counter to “0000”
Press s in stop mode. The counter is also set to
“0000” when opening the cassette holder.
s STOP/SET/CLEAR * – Stops play.
* or s STOP on the remote control (CSD-TD59 only)
e PLAY/PAUSE – Pauses play. During pause
mode, the tape counter flashes. To resume play, press
again.
f/g – Rewinds/ fast forwards. To stop the
winding, press s .
To start play when the power is off, press TAPE. The
power is turned on and play of the loaded tape begins
(Direct Play Function).
If you load a tape while the display flashes in step 2,
play starts without pressing
e .
After listening, press POWER 6 STANDBY/ON to turn
the power off.