Recording, Setting the sleep timer – Aiwa CSD-TD55 User Manual

Page 11

Advertising
background image

RECORDING

1

Insert a tape with the side to be recorded
on facing out and the exposed side facing
down.

2

Get ready to record from the source.

To record from a CD,

press CD and load the disc.

To record from a radio broadcast,

press

RADIO BAND and tune to a station.

3

Press REC.

The unit enters recording pause mode and “REC”
flashes slowly in the display.

4

Press e to start recording.

“REC” lights up in the display.
When the selected function is CD, CD play and
recording starts simultaneously.

To record only the selected tracks of a CD

1

Follow steps 1 to 4 of PROGRAMMED PLAY on
page 9 to program tracks.

2

Press REC.

3

Press

e

.

To stop recording,

press

s

.

To pause recording

(only when the source is RADIO)

,

press

e

. During recording pause mode, “REC”

flashes slowly. To resume, press it again.

To erase recording,

press TAPE and start recording

(press REC then

e

).

After recording,

press POWER

6

STANDBY/ON to

turn the power off.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Tab for side A

Side A

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a
specified time.

1

Hold down REPEAT/MODE/SLEEP *
until “SLEEP” flashes in the display.

* or MODE on the remote control (CSD-TD59

only)

2

Within 4 seconds, press f or g to
specify the time until the power is
turned off.

Each time it is pressed, the time changes
between 10 and 180 minutes in 10-minute
steps.

While the sleep timer works, “SLEEP” is
displayed.

To check the time remaining until the power
is turned off

Repeat step 1 shown above. The remaining time is
displayed for 4 seconds.

To cancel the sleep timer

Repeat step 1 to display the remaining time and
hold down REPEAT/MODE/SLEEP again until
“OFF” is displayed.

Simple sleep timer setting

Press REPEAT/MODE/SLEEP while the power is
off. The unit is turned on with the last function, and
the sleep timer is automatically turned on with the
30-minute setting.
Select the function, if you need, and start playback.

Specified time

ENGLISH

11

(CSD-TD59 only)

Advertising
This manual is related to the following products: