Alicat Flow Vision MX - Manual (Page 5)

5
Overview
1
2
13
5
3
11
10
9
8
4
6
7
12
1. Device Gas: The gas that the target device is set to flow.
2. Device Model Number: The model number of the target device.
3. Device Serial Number: The serial number of the target device.
4. Actual Mass Flow: The current mass flow measurement of the target device.
5. Device Set-Point: The current set-point (target flow) of the target device.
6. Actual Percent: The actual concentration percentage of the gas that the
target device is flowing. This will vary with the actual flow of all devices.
7. Target Percent: The target concentration of the gas in the overall blend.
8. Blend Composition: The makeup of the final gas blend.
9. Actual Total Flow: The total flow of the final gas blend.
10. Error: The flow error in terms of the target flow.
11. Maximum Flow: The maximum flow rate that can be reached.
12. Target Blend Flow Rate: The target rate of flow for the blend.
13. Start/Stop Mixing Button: Button to start/stop the mixing process.