Alicat Flow Vision MX User Manual
Page 9
9
Changing Flow Rates
When the total of all concentrations reaches 100%, the “Start Mixing” button
becomes enabled.
Clicking this button will start the mixing process.
Once mixing has started, the individual gas concentrations can not be
modified.
The percentages are unlocked when the mixing
process ends.
The output rate of your gas blend can be changed
in three ways.
The background of the Master Gas Mix gauge can
be clicked (1) to change a flow rate to a selected
value.
The indicator on the right of the gauge (2) can also
be dragged up and down to adjust the value.
Finally, the value can be edited directly in the box
under the gauge (
3).
To stop the mixing process, click the “Stop Mixing”
button.
All device set-points will be set to zero and the gas
flow will cease.
1
3
2