AT&T F160 - Manual (Page 19)

Accessibility
35
Settings
34
• From idle mode, select Menu > Settings
> Security > Change security codes >
PIN code to change the PIN code.
• If you enter the wrong PIN code three
times in a row, the phone will lock the
SIM card and prompt you to enter a PUK
code to unlock it.
Notes:
• If you change the PIN code, please
remember the new number.
• PIN2 is needed for some settings. Use the
same procedure as for the PIN code.
PUK Codes
A PUK code is the unlock code for the SIM
card. When the SIM card is locked, you have
to enter the correct PUK code and then enter
the new PIN code. The SIM card can then be
used normally.
• A PUK code may be supplied with a new
card. Contact your service provider for
more information.
• A PUK code can only be entered 10 times
in a row. If you enter the wrong PUK code
more than 10 times, the SIM card will be
locked indefinitely.
Note: If a PUK code is supplied with the
new card, please store it safely.
Fixed Dial Numbers
If you enable fixed dial numbers, you
cannot dial phone numbers that are not
in the FDN list.
FDN List
Allows you to create a list of fixed
dial numbers.
TTY Mode
Your handset is a TTY-compatible device.
Simply connect the TTY equipment to the
headset jack.
1. From idle mode, select Menu > Settings
> Phone > TTY setting.
2. Select one of the following options and
press the OK Key for Select.
• Full: Users who cannot talk or hear
may use this setting to send and
receive text messages through
TTY equipment.
• Read & talk: Users who can talk, but
cannot hear, may use this setting to
talk through the phone and receive
responses via text messages.
• Write & hear: Users who can hear,
but cannot talk, may use this setting to
listen to the other party and respond
via text messages.
• Off: Users who can hear and speak
may use this setting to disable
TTY support.
HAC (Hearing Aid
Compatibility) Mode
This phone supports HAC (Hearing Aid
Compatibility) function. When you turn on
the Hearing Aid Mode and use a hearing
aid with a telecoil to answer the phone,
it will help you hear more clearly while
speaking on the phone. For more detailed
information on HAC, please refer to
Care and Maintenance > Turn on the
HAC Setting.
1. From idle mode, select Menu > Settings
> Phone > HAC setting.
2. Select On or Off and press the OK Key
for Select to confirm.
Your F160 has been tested for hearing
aid device compatibility and has an
M4/T4 rating.