Crystal DataLoggerXP Digital Pressure Gauge Software - Manual (Page 16)

Data Logging with DataLoggerXP  14
XP2i Operation Manual
X to connect to the gauge
1 Plug the serial cable into the computer and XP2i gauge ports.
2 In the DataLoggerXP main window, click Connect.
The program will retrieve the current logging parameters, and then allow downloading, viewing, and saving data, as well as updating the logging
parameters.
X Password Protection
The password protection feature of the gauge allows you to prevent unauthorized changes to the data logging parameters. Once the password is set, the
Send to Gauge button will require the password. Changing logging parameters and Auto-Off settings through the keypad will be disabled. Passwords can
only be set or removed using DataLoggerXP or ConfigXP. In the event you lose the password, you will need to contact the factory for an unlock code, which
will remove the password protection. To set a password:
1 In the DataLoggerXP main window, click the Set Password button.
2 In the Change Password dialog box, enter and confirm your password and click OK.