MOMITSU V888N - Manual (Page 29)

- 28 -
Audio Output Setup
The DVD-V888N is equipped with the following audio outputs:
1. AC-3/DTS digital output (optical and coaxial)
2. Mix audio output – Left & Right
3. Scart output (European version only)
For AC-3 surround output, connect the DVD-V888N digital output (optical or coaxial) to
an amplifier with a built-in AC-3 decoder.
For DTS surround output, connect the DVD-V888N digital output (optical or coaxial) to
an amplifier with built-in DTS decoder
When the AC-3/ DTS digital output option is selected, an AC-3/DTS decoding-capable
amplifier is required. The Audio Setup – Digital Output option in the Setup menu should
be set to Encoded Digital, NOT Analog/DPCM. Change this setting when necessary.
1. Press the Setup button.
2. Press ▼ button to navigate to the Options icon & Audio setting.
3. Press Enter to select the Encoded Digital option.
4. Click Save when done
For analog audio output,
choose the
Analog/DPCM audio
option, and make sure the
DVD-V888N’s Audio
Out jack is connected to
the Analog Audio Input
of your AV system.
For digital audio output,
choose the Encoded
Digital option, and make
sure the DVD-V888N’s
Audio Out jack is
connected to the Digital
Audio input (optical or
coaxial) of your AV
system.