Warning – MOMITSU V888N User Manual
Page 4
- 3 -
Warning
TO REDUCE THE RISK OF FIRES AND ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION: To reduce the risk of fire and electric shock, do not remove
the cover of this product. Refer all maintenance requests to authorized
personnel only.
This lighting flash arrow symbol in a triangle alerts users to the
presence of non-insulated high voltage within the product's enclosure
that present an electrical shock hazard.
The exclamation point symbol in a triangle alerts users to the presence
of important operating and maintenance instructions in the literature
accompanying this product.
The mark, displayed on the rear panel of the unit, indicates that the unit
is a Class 1 device that uses lasers. No radiation hazard exists.
Read through this instruction manual before installing and using the DVD-V888N.
Only qualified personnel should service the DVD-V888N.
Do not touch the power plug with wet hands.
Pull the plug, not the cord, to disconnect the DVD-V888N from an electrical outlet.
Turn the main power off when the DVD-V888N is not in use. Disconnect the power plug
if you do not intend to use the DVD-V888N for a long period of time.
Before moving the DVD-V888N, first remove the disc from the unit's tray.
Do not open the cover or touch any of the components inside the unit.
Do not install or operate the unit when it is directly exposed to sunlight or other objects
that radiate heat -- the DVD-V888N may overheat and malfunction.
Install the DVD-V888N in a cool, dry location. High moisture and humidity may damage
the laser head.
Install the DVD-V888N on a flat surface with good air circulation. Do not cover or
obstruct the ventilation holes on the unit in any way -- the DVD-V888N may overheat.
Clean the DVD-V888N by wiping the panel and case with a soft dry cloth. Do not apply
any kind of thinner, alcohol or sprays.