Avaya 3631 - Manual (Page 6)

3631 Wireless Telephone Administrator Guide 6
Chapter 2: Installation and Configuration
This chapter provides information on installing and configuring the 3631 telephone.
Configuration Data Storage
The 3631 telephone stores its configuration data in two primary locations:
• The phone’s flash memory
• SIM card
The following configuration data is stored in the phone’s flash memory:
• IP address parameters
• Call settings
• Dial plan parameters
• Screen and sound settings, ring tones
• Contacts (full listing)—maximum of 500 entries
• Call Log—maximum of 80 entries
The following configuration data is stored on the phone’s SIM card:
• WiFi parameters
• Extension
• Contacts (abbreviated list)—maximum of 100 entries
DHCP
The 3631 telephone supports DHCP for IP address assignment and configuration of other
telephone parameters.
Like the 46xx and 96xx IP telephones, the 3631 telephone supports Site-Specific Option
Numbers (SSON) 242 and 176. The default is 242. Note that this parameter can be
changed only through the phone’s menu interface.
The following new parameters are unique to the 3631 telephone and can be set through
DHCP using either SSON 242 or 176:
• IPADDP2—the IP address assigned to the 3631 telephone for use with the second
Access Profile.
• IPADDP3—the IP address assigned to the 3631 telephone for use with the third
Access Profile.
• NETMASKP2—the network mask assigned to the 3631 telephone for use with the
second Access Profile.
• NETMASKP3—the network mask assigned to the 3631 telephone for use with the
third Access Profile.
• GIPADDP2—the gateway IP address used with the second Access Profile.
• GIPADDP3—the gateway IP address used with the third Access Profile.
• DNSSRVRP2—the IP address of the DNS server used with the second Access Profile.
• DNSSRVRP3—the IP address of the DNS server used with the third Access Profile.
• DOMAINP2—the domain name used with the second Access Profile.