Allied International Home Security System - Manual (Page 54)

Camera interfaces
Hardware Installation Guide V2.0.0
54
Note
L
DOLPHIN
• Voltage above +45 V may damage the circuit.
• Depending on the voltage applied at OutVCC and the
type of input which you want to drive, it may be neces-
sary to switch an external resistor in series.
See
Figure 28: Output schematics with external resistor
R (DOLPHIN) on page 53.
Note
L
For information on output features (IntEna, Fval, Busy) and
configuration via registers see Technical Manuals.