FUTEK IHH500 Series User Manual
Page 13
EM1001-B
- 13 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
1
Engineering units can only be converted within its own category.
Force (Mass): µg, mg, g, kg, M- tone, dyn, kdyn, Mdyn, N, kN, oz, lbs, klb, ton (US), ton (UK)
Torque:
g-mm, g-cm, kg-cm, kg-m, N-mm, N-cm, N-m, KN-m, in-oz, in-lb, ft-lb
Pressure:
Pa, kPa, mbar, bar, MPa, kg/cm², atm (standard atmosphere), mm-HG, in-H2O,
ft-H2O, psi, kpsi
Displacement: mm, cm, dm, m, km, in, ft, yds, mile
2
Pressing SHUNT will disable the HOLD function, but pressing HOLD will not disable the SHUNT
function.
Note: When a torque sensor is configured, the HOLD and SHUNT keys are disabled on the main page
showing the speed, angle and torque. Using the HOLD and SHUNT keys will prompt a warning
message.