FUTEK IHH500 Series - Manual (Page 76)

EM1001-B
- 76 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
6.2.8 Alarm Activity
Scroll to “ ALARM ACTIVITY ” from “ SYSTEM SETTING ” using the ▲▼ keys and press ENTER.
Using the
◄► keys different alarm activities including System Alarm or Relay Alarm can be either
enabled or disabled.
A prompt will be shown to set this value as a default setting.
The Peak values will blink in intervals of 2.5 seconds if the current value exceeds the alarm high limit.
The Valley values will blink in intervals of 2.5 seconds if the current value is below the alarm low limit.
WOULD YOU LIKE
TO SAVE AS
DEFAULT?
<YES> <NO>
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[DISABLE]
AUTO RESET
ALARM CONFIG
► ALARM ACTIVITY
-------------