Innotech Device Communications - Manual (Page 19)

Page 11
Chapter 3 – Connecting Innotech devices for initial configuration
DS 99.05 – Ethernet Setup Manual for Device Communications 3
Ethernet connection status indication
Typically an Ethernet connection is established using an RJ45 cable of Category 3 (CAT3)
or above rating as described in Chapter 2 – Ethernet standards and cabling information .
The coloured LEDs on the Ethernet port indicate the status of the Ethernet connection.
The different LED colours and the corresponding status indication are shown in Table 3-1.
RJ-45 Socket
Left LED
Right LED
Ethernet Link LED (Left LED) Ethernet Activity LED (Right LED)
LED colour Indication LED colour Indication
OFF Not connected OFF No Ethernet activity
Amber Connected at 10MBps Amber Connected at Half-duplex
Green
Connected at
100MBps
Green Connected at Full-duplex
Ethernet status LEDs Table 3-1: