JLab Audio Bouncer - Manual (Page 7)

7
If this is the first time you are pairing with your Bluetooth device:
1. Turn on your Bluetooth device.
2. S
et your Bluetooth device to “discover” or "on" under your phone or tablet's Bluetooth
Settings.
3. Please allow up to 15 seconds for your device to find The Bouncer.
4. Select the device named
“The Bouncer” to connect over Bluetooth.
5. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some
devices also ask you to accept the connection.
6. Your Bluetooth device indicates when pairing is complete. The Bouncer indicates pairing
is complete when the Blue indicator remains steadily on.
7. Once connected, play music from your device and have it play wirelessly through The
Bouncer speaker.
Please note for pairing additional devices:
When you have paired The Bouncer with a Bluetooth device and want to use another device
instead, please set your first Bluetooth device to
“undiscover” or disconnect from the
Bouncer.
Once you have disconnected the previous Bluetooth device, you may follow steps 1
– 5
above to connect a new device.
Only 1 Bluetooth device can be paired with the speaker at any given time.