JLab Audio Bouncer - Manual (Page 8)

8
Making Calls
The Bouncer includes a built-in mic and call control for hands-free calls.
How to answer a call:
1. Make sure that your smart phone is connected to The Bouncer via Bluetooth.
2. When you receive a call, press the Phone Button 2 ( ) to answer.
3. If you need to select an audio source on your Bluetooth device for the call, manually
choose the The Bouncer and proceed with the call through the speaker.
Aux in Mode
You can use any audio device with The Bouncer by connecting with an Aux cable. The
Bouncer comes fully equipped with an Aux port to allow one to connect with their own Aux
cable.
When the speaker is on, here is what you do:
1. Press
/ MODE Button 1 to shift from Bluetooth mode to Aux in mode.
2. Plug the cable from your audio device into the Aux connector on the back of The
Bouncer.
3. To gain optimal volume levels, adjust the output volume level on both the source device
and The Bouncer itself.