PATLITE KJT User Manual

PATLITE Audio

Advertising

٨Use only specified operating voltage range. Excess voltage hastens degradation.
٨Make sure to set fuse in a power supply side, please connect a fuse.
٨To clean lens, head cover, and body, wipe with water or glass cleaner

soaked soft cloth. Do not use thinner or benzine, gasoline, oil as these cause
color change or deform the surface.

٨Absolutely do not connect direct power in a signal wire and common wire,

damage the internal circuit.

٨Make sure not to use any other bulbs except ones described in specifications.

Caution

4048-L

C95100022

FC001

INSTRUCTION MANUAL

㨇TYPE 㧦 KJT , KJPV㨉

Thank you for purchasing a , . To ensure
proper operation, please read this instruction manual thoroughly
before attempting to use the system. Also, when undertaking
maintenance, inspection or repair work, be sure to refer to this
manual. If you have any questions regarding this product, please feel
free to contact us.

٨Wiring should be careful enough there to be for no mistake. If wiring is

mistaken, an internal circuit will be damaged and it will become the cause
of a fire.

٨When the installation of this product requires the construction, please ask

to specialist. Electric shock, fire and fall may occur.

٨When you use this product for security purpose, routine inspection must be

done. Just in case of emergency we recommend you to use this product
together with other security product.

٨Do not use this product without lens or head cover with cracked lens. It

may cause electric shock.

٨Make sure power is turned off to avoid electric shock, when you repair this

product as color reformation.

٨Make sure power is turned off and the temperature of electric bulb falls

down for repair to avoid electric shock and burn.

٨Make sure power is turned off when checking or changing a fuse to prevent

danger of electric shock

٨Turn off the power supply before making wiring connections. Neglecting to

so may cause an electric shock.

٨All loose ends of wires left unconnected upon the completion of wiring

must be insulated individually, or they may cause equipment problems, short
circuits or electric shock.

When mounting the unit outdoors or in a place where water may splash on
it, avoid inverted or sideways mount. If water seeps into the unit through the
drain hole on the bottom of the case, then collects inside, it may cause an
electric shock or short circuit.

٨Be careful when handle a bulb, reflector or lens (or other plastic parts) since

these parts are fragile.

٨Be sure to waterproof an uncoated part of power supply line and signal line in

case this product is used in the rain or water exposing environment. Water
immersion into the product may result in malfunction or electric shock.

Warning

4048-L

'09.4.AUTO

Turn to left.
(Remove)

Push down

Turn to right.
(Install it.)

Make sure power is turned off
when changing lens.
Loosen head cover screw, then
put the lens off.
Put the new lens, then installing
head cover.

1. Change lens

2. Change bulb

3. How to adjust the sound volume

Be sure to reinstate the rubber packing
to the body lens and head cover
(one size for all applications) or the
unit will no longer be splash proof.

Slide to upward
for removal.

Slide to downward
for installation.

Remove screw

Please follow the procedure mentioned below to change the lens

㧚MAINTENANCE

࡮

Please follow the procedure mentioned below to change the bulb.

࡮

Please follow the procedure mentioned below to adjust the volume.

࡮

Make sure power is turned off when
changing lens.
Remove lens. ( Refer to the "Change lens " )
The bulb can be easily removed by
pressing it downward to turn to left.
The new bulb can be easily installed
by pressing it downward to turn to right.
Install lens. ( Refer to the " Change lens " )

ԙ
Ԛ

Remove lens. ( Refer to the "Change lens " )
It is adjustable when volume turned.
Install lens. ( Refer to the " Change lens " )

Ԙ
ԙ
Ԛ

VOL.

To increase

To decrease

٨
٨

Make sure power is turned off for electric shock prevention in case
of bulb repair.
Make sure power is turned off when checking or changing a fuse
or bulb to prevent danger of electric shock.
Make sure power is turned off and the temperature of electric bulb
falls down for repair to avoid electric shock and burn.
Make sure not to use any other bulbs except ones described in
specifications.
Do not use the hands to rotate reflector.
Do not oil the motor and roter. (Neither will it rotate if oil enters
the motor.)

Caution

㧣㧚BEFORE REQUESTING SERVICE

㧤㧚SPECIFICATIONS

Please note that any malfunction or damage resulting from modification by
the warranty.

Please check the list shown below before requesting repairs. If the
product still not work, please contact us for repairs. Please feel free
to contact our sales office with any questions concerning the product.
For inquiry, you are required to identify the number indicated at the
name plate of the product.

࡮

Problems

Where to check

What to do

࡮Is the power on?

࡮+Uwiring mistake?

࡮Is the method of the
message choice wrong?

࡮+Utype of sound
wrong?

࡮Check the power wiring plug
connection and fuse.

࡮If a switch is installed check to
see that It is turned on.

࡮Bulb stays
turned off

࡮The reflector
would not rotate

࡮No sound from
speaker

࡮Is the light bulb
burned out?

࡮If it is, replace it with a new one.

࡮The reflector
rotates but the
lamp is off

࡮The bulb is
turned on
but the reflector
stays stopped

࡮The motor is broken or has
reached the end of its life.
Request a repair.

࡮Adjust the volume of the equipment
for proper sound level.

࡮Is the motor stopped?
Is the motor lubricated?

࡮Is volume the
smallest?

࡮Check and correct the power
polarity. (24V version only)

࡮Wrong message
or sound
played back

غ116

1light

232

2lights

337

3lights

442

1. Dimensions

(mm)

Signal line : approx.400

Power supply wire : approx.300

(Type 24V DC:approx.250)

2. Type of sound

3. Specifications

4-M6

3ch(Pink)

5ch(Purple)

6ch(Gray)

7ch (White)

8ch (Blue)

Bell

(clear high pitched bell)

Synthesized

Piano

Synthesized Bell

Chime (door chime)

4ch(Light green)

Yelp

(rapid siren)

Call sign (PiPiPi

KJT-L

(

chime

࡮melody

)

KJT-K

(alarm)

type

㧲

㧽

㧿

1ch (Sky blue)

Beep

(slow intermittent horn)

Rapid Hi-Lo

Amaryllis

2ch(Yellow)

Stutter

(rapid intermittent horn)

Melody Chime

Cuckoo

Holdiridia

SymphonyNo.40

For Elise

Maiden's Prayer

Merry had a

little Lamb

The camptown

Races

Annie laurie

Minuet

Ob-La-Di,

Ob-La-Da

On the Avignon

bridge

Blacksmith in

the village

Romance

De Amour

London bridge is

falling down

Petrouchka

Silent Lakeside

Mountain

musician

MODEL

1-light
2-lights

Model

Rated voltage

Bulb

Max volume level

Vibration proof

Operative location

Dispatch frequency

Anti-noise (Power supply)

Operative voltage range

Operative temp. range

Power

consumption

KJT-102KA,L

KJT-202KA,L

KJT-302KA,L

1.4kg
2.0kg
2.6kg

KJT-110KA,L

KJT-210KA,L

KJT-310KA,L

KJT-112KA,L

KJT-212KA,L

KJT-312KA,L

KJT-120KA,L

KJT-220KA,L

KJT-320KA,L

KJT-124KA,L

KJT-224KA,L

KJT-324KA,L

24V AC/DC

45m/s

24V 10W

100V AC

120V AC

220V AC

240V AC

25W(AC)/18W(DC)

20W

36W(AC)/28W(DC)

26W

47W(AC)/38W(DC)

32W

1.7kg
2.4kg
3.0kg

12V 5W

19.6m/s

㨪27V AC/DC 90㨪110V AC 100㨪140V AC

-20

͠㨪+50͠(Humidity 85% or less)

90dB max.(at 1m)

indoor , outdoor (upright) IP23

500Vp-p

262.144kHz

r20%

Grass:G18, Base:BA15S

180

㨪240V AC 220㨪260V AC

3-lights

1-light
2-lights

Mass

3-lights

1-light
2-lights
3-lights

Type KJT

1-light
2-lights

Model

Rated voltage

Bulb

Max volume level

Voice synthesis method

Muximum-recording time

Vibration proof

Operative location

Anti-noise (Power supply)

Operative voltage range

Operative temp. range

Power

consumption

KJPV-102S
KJPV-202S
KJPV-302S

1.4kg
2.0kg
2.6kg

KJPV-110S
KJPV-210S
KJPV-310S

KJPV-112S
KJPV-212S
KJPV-312S

KJPV-120S
KJPV-220S
KJPV-320S

KJPV-124S
KJPV-224S
KJPV-324S

24V DC

45m/s

24V 10W

100V AC

120V AC

200V AC

240V AC

20W

30W

26W

40W

31W

1.7kg
2.4kg
3.0kg

12V 5W

19.6m/s

㨪27V DC 90㨪110V AC 100㨪140V AC

-10

͠㨪+55͠(Humidity 85% or less)

95dB max.(at 1m)

ADPCM

16sec. (1Mbit EPROM)

indoor , outdoor (upright) IP23

500Vp-p

Grass:G18, Base:BA15S

180

㨪240V AC 220㨪260V AC

3-lights

1-light
2-lights

Mass

3-lights

1-light
2-lights
3-lights

Type KJPV

٨ We are not in a position to be responsible for damage and

trouble caused by handling against caution and warning
described in this instruction manual.

Caution

̪Specifications are subject to change without notice.

࡮Check for correct signal-line
connections.

࡮Check the input signal for correct
format ( 1-bit input )

࡮Confirm the assignment of the
message or sound required.

TO OPERATE THIS PRODUCT SAFELY, PLEASE OBSERVE THE FOLLOWINGS

This symbol marks important instructions that, if ignored
or incorrectly followed, could conceivably lead to death or
serious injury.

This symbol marks important instructions that, if ignored
or incorrectly followed, could conceivably lead to injury
or property damage.

NOTES TO BE OBSERVED FOR SAFE OPERATION

Caution

Warning

Note to be followed to prevent any damage to the user and other personnel or
to assets are as follows

عThe indications for warning are divided into the following classes according to

the degree of danger or damage incurred when the warning is not taken into
consideration and the product is not correctly used.

-1-

-8-

-7-

-6-

Advertising

Popular Brands

Popular manuals