Raytec RAYMAX 300 PLATINUM - Manual (Page 3)

3
!
CAUTION: Red = +ve
Black = -ve
(polarity sensitive)
Installation
CAUTION: ensure cable glands
and PSU lid are water tight by
tightening the fixings
!
!
Telemetry Input
Mains In LeD Output x2
PSU connections.
Connect telemetry (if required)
4
Connect PSU to Mains 5
Mount illuminator
Mount PSU:
Do not position PSU
photocell facing illuminator
or other direct light sources
Photocell monitors ambient
lighting conditions
Mount PSU on wall/flat
surface with glands
facing down
Connect Illuminator to PSU:
Installers can extend or
reduce lead length using
appropriate cable and
weather proof box
2
3
1
1m - 9m
(3.3ft - 29.5ft)
Model dependent
Contact Raytec
1
2
Main
s Lead
3