Setra System SRPM - Manual (Page 22)

22
PRESSURE MONITORING SCREENS
At completion of setup, the main display will be the pressure monitoring
screen, which displays the actual room static pressure.The room static
pressure is shown as a number on the LCD as well as a “Moving Bar”
indicator operating between the preset pressure limits. Normal room
pressure conditions within the preset pressure limits are verifi ed by
a green colored screen. When the door is opened under conditions
within the preset pressure limits, the screen turns to yellow. Room static
pressure outside of the preset limits is indicated by a Red screen after
the alarm’s time delay expires.
CHANGING ROOM MODES
The SRPM can quickly be changed from active monitor and alarming to
No Isolation (or unoccuped). To do this touch the room mode indicator at
the top of the pressure monitoring screen (see above).
OCCUPIED/NO ISOLATION
Use these buttons to quickly change the room to Occupied (Standby)
or No Isolation status. If No Isolation is used there will be no alarms
generated if the room is outside pressure limits.
Press Save and Exit.
Click here to access
ROOM MODE Screen