Sterlco SDD Series User Manual
Page 32
Advertising
32 of 96
Screen 4.
The disc will make one complete revolution, dispensing additive into the tray. Motor speed is 25%.
When the motor stops, Screen 5 is displayed.
Screen 5.
Weigh the sample, making note of the weight for entry on the next screen. Discard sample & replace
tray in calibration box. Press “Next” to display Screen 6.
Screen 6.
Enter the sample weight obtained from the previous cycle of the feeder. The unit of measure will be
the same as used for the calibration weight. Pressing the Enter symbol on the screen keypad displays Screen 7.
Advertising