Sterlco SDD Series - Manual (Page 8)

8 of 96
Figure 1: Safety Tags and Warning Labels
Hazard Alert Symbol Description/Explanation Preventative Maintenance
Pinch point slide gate.
Hands can become
entangled or cut if they
enter the danger zone of
gears. Every month inspect the
shears/blades for any type of
wear. For further information
see the Maintenance Chapter
in this manual.
High voltage inside
enclosure. The electrical
enclosure is supplied with
3-phase electrical power.
Use caution when using or
maintaining this product. Every six months inspect all
electrical connections for
secure attachment. For
further information see the
Maintenance Chapter in this
manual.
Mandatory Symbol Description/Explanation
Read Operators Manual. This equipment must be operated and
maintained by properly trained personnel. The information
contained within this manual must be read and understood prior to
operating this equipment.
Lifting point. Heavy load can fall and cause serious injury or
possible death. Lift equipment at designated points.
Disconnect before opening. Before servicing or maintaining the
machine be sure to disconnect the power and/or compressed air
source to avoid electrical shock and/or serious injury.
Lock Out. This equipment is operated with 3-phase electrical
power. Therefore, when performing any maintenance operations
we recommend following the local standards for performing a
lock-out/tag-out procedure.