Sterlco ST500 Series Central Granulator - Manual (Page 70)

70
MAINTENANCE
SECTION 6-5
Screen Replacement
REMOVE THE SCREEN
The screen is divided into segments. Remove one segment at-a-time.
Grasp it on its near edge and raise the edge by allowing the screen to slide in the cradle.
Pull it toward you slowly allowing it to slide over the edge of the screen. Be careful not
to hit the rotor knives with the trailing end of the screen.
Ease it to the floor and remove it from the front of the granulator.
Repeat the foregoing steps for each segment of the screen.
RELEASE THE SCREEN FASTENERS
Loosen the mounting cradles and remove one at a time.
Pivot the cradles down until they rest on the floor
--BEWARE OF ROTOR KNIVES--