Teco US TR5-60 - Manual (Page 5)

Page 8
Page 9
Included Parts List
O Ring
Attached to chiller (2)
Shutoff Valve
(2)
In / Out Plugs
Located in the in/out ports of the
chiller (2) Attached to chiller
Elbow
chiller (2) Attached to chiller
Ring Nut
Located in the in/out ports of the
chiller (2) Attached to chiller
Washer
Located in the in/out ports of the
chiller (2) Attached to chiller
Note: Color and appearance of actual parts may vary slightly
Ring Nut
Attached to chiller (2)
Housing Ring Nut
Attached to chiller (2)
Housing Gasket
Attached to chiller (2)
Power Cord
TR30/60 - Power Cord is attached to chiller
Fuse
1 installed, 1 spare
Air Filters
1 installed, washable / reusable
TR 5 TR 10 TR 15 TR 20 TR 30 TR 60
Inspect the chiller closely upon receipt.
1
Record any indication of damage and contact seller immediately.
Save the box and packing materials 2
If your chiller ever needs to be repaired or serviced, you will need to ship it in the original box.
Record your Model and Serial Number for easy reference 3
There is a space on the first page of this manual to record this information. You may be asked
for the serial number when calling for support.
Bottom Front , Underneath the Air Filter
Air filter must be removed to
access the serial and model number
Back
Serial and Model Number Location
TR 5 TR 10 TR 15 TR 20 TR 30 TR 60
Receiving and Inspection
Our Quality Control procedure includes running water through the chiller to test the
cooling capacity. There may be residual water in the unit due to this method of testing,
this is normal.
NOTE:
When the chillers are inverted during maintenance or shipping, you must let the unit
sit for at least 30 minutes upright to allow the coolant to settle: failure to do this before
turning on the chiller may result in damage to the compressor.
WARNING: