Timeguard TG77 - Manual (Page 7)

6
Press ← until hour digits reach 16 then
Press SET, display shows:
Press → until minute digits reach 05 then
Press SET, display shows:
Press → and display moves to the next
ON time of the programme (2) in the
sequence of 20 showing:
The TG77 now has the first programme locked into memory and is
ready to receive additional programmes if required. When
programming is complete press the TIME button to return to the
operating mode. When programming additional programmes the
choice of day or day group is always totally open.
Note: Day/Days have to be set independently for each ON and OFF
entry. This makes it easy to set programmes which traverse midnight
or which carry on for more than one day.
7. Suspending A Programme
From operating mode press → repeatedly until the ON or OFF
programme to be suspended is reached (button ← can be used to
retrace steps if necessary). Press the button and display will reset
to – – : – – then press the TIME button to return to operating mode.
To reinstate programme again use → to reach suspended programme
and press to retrieve suspended programme then press the TIME
button to return to the operating mode.
ON and OFF halves of the same programme have to be suspended
seperately.