Timeguard TR 672 top - Manual (Page 6)

Programming the Switching Time
Switching times for lighting systems, machines, ventilation
systems, alarm systems etc.
Formation of day groups: If the same switching times are active on
several days of the week, they occupy just one memory location 42
memory locations are available, e.g. Monday - Friday 7.30 hrs ON .
Group formation:
In answer to the text question Copy, decide by
pressing the key that the day program should be copied to
another day of the week.
When programming an ON and OFF switching time, e.g. 9 AM, a
switch-off at 9 AM always has priority.
Program review:
Following programming the timer makes a program
review back to midnight and then sets the correct switching status.
5
Example: Example: Switching on the lighting of a sports hall on Mon.,
Tues., Thurs., Fri. from 7.30h until 12h.
Programming example:
Select PROG by pressing the key. Store your selection by
pressing the key. Select NEW by pressing the or .
Store your selection by pressing the key. Select channel C1 or C2
by pressing or . Store your selection by pressing . Select ON
or OFF by pressing or . Set the hours and minutes by pressing
the or key. Store selection by pressing .
To store one day of the week
only:
Select weekday by pressing
or . Select store by pressing
. Store by pressing .
To copy to other days of the
week:
Store COPY by pressing .
Select weekday by pressing
or . Store by pressing .
To leave out a day of the week,
skip by pressing the key.
Finally select the STORE display
by pressing . Store your
selection by pressing .