Timeguard LEDX20PIRB User Manual

Led floodlight, Helpline, 3 year guarantee

Advertising
background image

7

8

9

10

LEDX10PIRB.1 & LEDX20PIRB.1 Instructs_147x105 7-11

13-12-13 9.00AM

TG-LED-X10W PIR-D-B / TG-LED-X20W PIR-D-B

Lamp turns
ON at night.

Lamp turns ON

at day & night.

The purpose of the lens mask is to mask out areas not desired for detection.

Masking The Sensor Lens:

Lens masking

Setting Advise

WARNING

• To restrict the sensor coverage, preventing detection in unwanted areas,

mask the sensor lens using the masking label provided. The top section of

the lens covers long range detection, the bottom covers short range.

Similarly the left and right lens sections cover the left and right detection

areas respectively.

Lamp Adjustment

The lamp can be tilted upward 45º and
tilted down 60º.

Tilt downward 60º

Tilt down 45º

WARNING

Manual Override Mode:

The light can be switched on for longer time periods by use of the Manual

Override Mode.

This can be activated night by using the internal wall switch or circuit

breaker.

Switch the internal wall switch/circuit breaker single (OFF/ON) within 1.5

second.

The unit will now illuminate continuously until dawn or until switched back

into Auto Mode.

To switch the unit back into Auto Mode, switch the internal wall switch/circuit

breaker once (OFF/ON) within 1.5 second.

The unit will return to its Auto mode and will operate as set up after the walk

test procedure.

LED FLOODLIGHT

Model: LEDX10PIR

Model: LEDX20PIR

67.058.502

020 8450 0515

Technical specifications:

Knob Settings
LEDX10PIR or LEDX20PIR have two adjustment knobs:

Time and Lux at the bottom of the detector head.
• Adjust knobs carefully with flat blade screwdriver.
TIME knob setting

• You can set the time knob from 5 sec to about 10 min, LEDX10PIR or

LEDX20PIR will turn ON the lamp, for the time duration set after each

detected movement.


• Adjust the knob as desired.

LUX knob setting

• When setting the Lux knob at “MOON”, LEDX10PIR or LEDX20PIR will

only operate in the dark.

• When setting the Lux knob at “SUN”, LEDX10PIR or LEDX20PIR will

operate in any light level.

Dusk Setting (Time knob setting)

• When setting the Time knob to fully clock wise, the motion detector of

LEDX10PIR or LEDX20PIR won’t function.

The lamp will operate depending on the “LUX” level, ie Dusk to Dawn..

10min

5sec

0

Min

10

0 5

sec

Turn On time adjustment

Environment lux level to turn On

-20

+40

10

20

30

40

50

60

Adjustments

Dusk/Dawn

Time

Test mode

Timeguard Limited.

Victory Park, 400 Edgware Road,

London NW2 6ND

Sales Offi ce: 020 8452 1112

or email csc @ timeguard.com

For a product brochure please contact:

or email helpline @ timeguard.com

HELPLINE

020 8450 0515

Energy Efficiency

Energy Usage Lamp On

Power Supply

Power Factor

Colour Temperature

Colour Rendering

Lumen Output initial

Detection Range

Detection Angle

Lamp Beam Angle

Time On Adjustment

Dusk Level Adjustment

Environmental Protection

3 Year Guarantee

In the unlikely event of this product becoming faulty due
to defective material or manufacture within 3 years of the
date of purchase, please return it to your supplier in the
first year with proof of purchase and it will be replaced free
of charge. For years 2 and 3 or any difficulty in the first year telephone
the helpline on 020 8450 0515.

If you experience problems refer to Troubleshooting Guide.

If problems still exist, do not immediately return the unit to store.

Telephone the Timeguard Customer Helpline

Qualified Customer Support Co-ordinators will be on-line to assist

in resolving your query.

This product will get warm when in

normal use. Can be installed on

surfaces of normal flammability

e.g. wood, plasterboard, brickwork

and other masonry. Do not install

on flammable surfaces such as

plastics.

Note:
A proof of purchase is required in all cases. For all eligible replacements

(where agreed by Timeguard) the customer is responsible for all

shipping/postage charges outside of the UK. All shipping costs are to be

paid in advance before a replacement is sent.

Class A+
LEDX10PIR - 10kWh/1000h, 9.5W typ
LEDX20PIR - 17kWh/1000h,16.1W typ
230 V AC ~ 50Hz
> 0.95
5000 - 5600k
> 70
LEDX10PIR - Black: 685 lm typ, White: 750 lm typ
LEDX20PIR - Black: 1260 lm typ, White: 1325 lm typ
Up to 12 metres
180º
110 x 100 degrees
The lamps are not replaceable in this product
5 seconds -10 minutes
Day & night or night only operation
IP55 (suitable for indoor and outdoor use)

Advertising
This manual is related to the following products: