Timeguard HF1 - Manual (Page 2)

1
2. Adjustments:
1. TIME: The detector has an adjustable TIME ON control from 3 sec.
to 30 min. Move the time indicator fully anti-clockwise for the shortest
time (approx 3 sec). Move the time indicator fully clockwise for the
longest time (approx 30 min). The timer starts working after the last
detected movement. See Fig. A.
2. RANGE: The sensor has a detection range which is adjustable
from 0.5m to 6m. Move the range indicator fully anti-clockwise for the
minimum setting (0.5m). Move the range indicator fully clockwise for
the maximum setting (6m). See Fig. B.
3. LUX (light level): It can be set to any level between 1 – 2000 Lux.
Move the lux indicator fully anti-clockwise for night time operation
(approx 1-8 Lux). Move the lux indicator fully clockwise for daylight
operation (approx 2000 Lux). See Fig. C.
1. Specifications:
1. Power: AC 220 ~ 240V 50MHz.
2. Sensor Technology: 5.8GHz High Frequency.
3. Switching capacity: 1000W Incandescent or Halogen / 500VA
Fluorescent or Low Energy.
4. Angle of coverage: 360° with 160° angle of aperture.
5. Lux setting: 1 ~ 2000 Lux.
6. Time setting: 3 sec to 30 min.
7. Manual override: Switchable (4 Hours).
8. Warm up: 60 sec.
9. Indoor use only.
Fig. A Fig. B Fig. C
®