Timeguard TPSL04 User Manual

Instructions, 3 year guarantee, 3 specifications

Advertising
background image

TPSL01, TPSL02, TPSL03, TPSL04

TPS101, TPS201, TP203

InstructIons

3 Year Guarantee

In the unlikely event of this product becoming

faulty due to defective material or manufacture

within 3 years of the date of purchase, please

return it to your supplier in the first year with proof

of purchase and it will be replaced free of charge.

For years 2 and 3 or any difficulty in the first year

telephone the helpline on

020 8450 0515.

For a product brochure please contact:

Timeguard Ltd. Victory Park, 400 Edgware Road,

London NW2 6ND Tel: 020-8452-1112

or email [email protected]

A Group company

67-058-152

THREE YEAR

GUARANTEE

3

F I V E Y E A R

GUARANTEE

5

T W O Y E A R

GUARANTEE

2

O N E Y E A R

GUARANTEE

1

3.1 Sockets

Current rating:
(single TPS101, TP203)

13A to BS1363

(double TPS201)

20A to BS1363

Voltage:

230V, 50Hz a.c.

Weatherproof rating:

IP55

Operating temperature range: -10 to 40ºC
Installation temperature range: 0 to 30ºC
Complies with:

BS1363

Conforms to directives:

73-23-EEC, 89-336-EEC

3 Specifications

3.2 Switches

Current rating:
(TPSL01, TPSL02, TPSL03)

10AX (10A fluorescent rated)

(TPSL04, TP203)

20AX (20A fluorescent rated)

Voltage:
(TPSL01, TPSL02, TPSL04)

230V, 50Hz a.c.

(TPSL03)

Any voltage up to 230V, 50Hz a.c.

Weatherproof rating:

IP55

Operating temperature range: -10 to 40ºC
Installation temperature range: 0 to 30ºC
Conforms to directives:

73-23-EEC, 89-336-EEC

2.3.2.5 Double Switch (TPSL02) - Both On/Off

2.3.2.7 Double Switch (TPSL02) - Both 2 Way

(Remote Live Access)

2.3.2.8 TPSL04

2.3.2.6 Double Switch (TPSL02) - Both 2 Way

(Strapping Cable)

2.3.1 Sockets

In spur configuration we recommend feed cable of 1.5 sq. mm for
the single socket and 2.5 sq. mm for the double socket. If the unit is
to form part of a ring then incoming and outgoing cables must
both be 2.5 sq. mm (with the double socket we recommend that
the incoming and outgoing cables can be connected to one socket
each with a 2.5 sq. mm bridging cable between the two sockets.
Use back box earthing terminals to maintain earth continuity where
required.
With the TP203 switch and socket the double pole switch may be used
independently from the socket for switching e.g. lighting, or it may be
used to switch the live or live and neutral supply to the socket outlet.

2.3.2 Switches

These switches are not suitable for intermediate use in three way
(and above) systems. Wiring to the switches would normally be in 1
sq. mm or 1.5 sq. mm for heavier loads.
Use back box earthing terminals to maintain earth continuity where
required.

Standard Switch (remote)

(could also be a second TPSL01or half a TPSL02)

Standard Switch (remote)

Standard Switch (remote)

Standard Switch (remote)

(could also be a second

TPSL01 or half a TPSL02)

Standard Switch (remote)

Standard Switch (remote)

TPSL01

Connections to SL (lights) and L

(supply live) can be swapped if required.

TPSL02

TPSL02

Any a.c. voltage

supply up to 230V.

SL (to light(s))

SL (to light(s))

SL (to light(s))

to bell(s)

SL

(to light(s))

SL

(to light(s))

SL

(to light(s))

L

(supply live)

L

(supply live)

L

(supply live)

L (supply

live)

L (supply

live)

L (supply

live)

2.3.2.1 Single Switch (TPSL01) - On/Off

2.3.2.2 Single Switch (TPSL01) - 2 Way

(Strapping Cable)

2.3.2.3 Single Switch (TPSL01) - 2 Way

(Remote Live Access)

2.3.2.4 Bell Switch (TPSL03) - On/Off Only

A1

A1

B1

L2

L2

L2

L1

L1

L1

A2

A2

B2

A2

A2

B2

L2

L2

L2

A1

A1

B1

L

C

C

L1

L1

L1

TPSL01

TPSL02

TPSL02

COM

COM

COM

COM

COM

COM

L

A1

A2

A2

B2

L

C

L

L

C

L

SL

(to light(s))

SL

(to light(s))

SL

(to light(s))

L

(supply live)

L

(supply live)

L

(supply live)

Either standard switch could be a TPSL01 or half a TPSL02).

Connections to SL (lights) and L (supply live) can be swapped if

required.

This has two ON/OFF isolated switches controlled by a single rocker

which can be wired to switch both live and neutral for a single circuit

or can be wired to switch live only for two circuits (where the total

load exceeds 20A) or can provide totally independent control of two

circuits (albeit simultaneously).

Either standard switch could be a TPSL01 or half a TPSL02.

Advertising
This manual is related to the following products: