Timeguard TPT88 - Manual (Page 10)

9
Setting Temperatures
Press and hold PROG button, then press and release
MODE/NEXT, fi nally release PROG button. The display
shows COM (comfort temperature with its current value
fl ashing. Use the + or – button to increase or decrease
the value in 0.5°C steps as required.
Press MODE/NEXT and release. The display now shows
ECO (economy temperature) with its current value
fl ashing. Use the + or – button to increase or decrease
the value as required.
Mode Key
The TPT88 has three operating modes:-
Normal (or timed) operating mode.
Continuously OFF (no heating at all).
Continually controlling the comfort temperature.
It is possible to move between these modes by pressing
and releasing the MODE/NEXT button.
Timed Override for Two Hours
The unit must be in normal (or timed) mode. Press and
release the + or – buttons and the temperature display
will show the current control temperature (comfort
during ON periods, economy during OFF periods).
Adjust the temperature to be maintained for the two
hour period (starting immediately) by using the + or
– buttons. The programme indicator will fl ash indicating
a timed override.
To cancel press the PROG button and release.
TPT88_Instructs_Art_TG_1.5.indd 10 TPT88_Instructs_Art_TG_1.5.indd 10 19/9/06 09:53:54 19/9/06 09:53:54