Timeguard TPT88 - Manual (Page 9)

8
Repeating a Programme Over One
or More Days
A common requirement is to have the same programme
operating over a number of days. Having set the fi rst
days programmes continue pressing the PROG button
until the day is fl ashing. Now press the TIME/COPY
button and release, COPY will be displayed fl ashing. Use
the + or – button to select the day to be copied to and
press and release the TIME/COPY button again. COPY
is now displayed statically. Select another day using the
+ or – button and press TIME/COPY again, repeat until
all days to be copied have been covered. Finally press
MODE/NEXT to return to normal operating mode.
Reducing the Number of
Programmes in Operation
a. Reducing three programmes to two. Adjust the OFF
time for programme 2 (P2) to be the same as its ON
time.
b. Reducing three programmes to one. Adjust the OFF
time for programme 1 (P1) to one minute before the
ON time for programme 2 (P2), and adjust the OFF
time for programme 2 to one minute before the ON
time for programme 3 (P3).
c. Reducing two programmes to one. The technique
described in (b) can be used where there are only
two programmes operate with the ON and OFF
times for programme 2 the same.
d. Cancelling all programmes. To cancel all three
programmes make the ON and OFF for each
programme the same.
TPT88_Instructs_Art_TG_1.5.indd 9 TPT88_Instructs_Art_TG_1.5.indd 9 19/9/06 09:53:54 19/9/06 09:53:54