Transmille 2090 - Manual (Page 6)

2090 OPERATION MANUAL
TRANSMILLE LTD. PAGE 5
Manual Operation
To operate the 2090, simply connect the mains adapter to power up the unit.
The display will illuminate and show the following (note the cursor under the right hand zero) :
To set up a resistance, simply select the digit required using the left / right cursor buttons
(move the cursor to the required digit), the use the up / down buttons to select the required
number.
Note : If the digit is incremented to above ‘9’, the display will cascade up to the next digit, for
example if the display read :
Then the 9 will cascade up to the next digit to read ‘10’