Setting the sleep timer – Aiwa CSD-FD82 User Manual

Page 11

Advertising
background image

a

PAUSE

c

PLAY

s

STOP

r

,

t

En

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Tab for side A

Side A

To stop recording,

press

s

. To stop CD play, press it

again.

To pause recording

(only when the source is TUNER)

,

press

a

. To resume, press it again.

To erase recording,

press TAPE and press

w

.

After recording,

press POWER STANDBY/ON

6

to

turn the power off.

To insert blank spaces

When recording from the radio, 4-second blank spaces
can be inserted. These spaces are useful to locate the
desired portion on the tape when playing back on other
units with the “Music Sensor” function.

1

Press

w

REC/REC MUTE in recording or recording

pause mode.
“REC” indicator flashes quickly and the tape runs
without recording for 4 seconds, then pauses.

2

Press

a

to resume recording.

To make blank spaces less than 4 seconds,

press

a

while “REC” flashes quickly.

To make blank spaces more than 4 seconds,

press

w

again after the tape pauses.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a
specified time.

1

Hold down * REPEAT/MODE/SLEEP
until “SLEEP” flashes in the display.

* or MODE on the remote control

2

Within 4 seconds, press

r or t to

specify the time until the power is
turned off.

Each time it is pressed, the time changes
between 10 and 180 minutes in 10-minute
steps.

While the sleep timer works, “SLEEP” is
displayed.

To check the time remaining until the power
is turned off

Repeat step 1 shown above. The remaining time is
displayed for 4 seconds.

To cancel the sleep timer

Repeat step 1 to display the remaining time and
hold down REPEAT/MODE/SLEEP again until
“OFF” is displayed.

Simple sleep timer setting

Press REPEAT/MODE/SLEEP while the power is
off. The unit is turned on with the last function, and
the sleep timer is automatically turned on with the
30-minute setting.
Select the function, if needed, and start playback.

Specified time

ENGLISH

11

Advertising
This manual is related to the following products: