1 general setup, Important note, Memory storage – Brother MFC-J470DW User Manual
Page 7: Volume settings (mfc models), Ring volume, Setting the ring volume from the menu, General setup
1
1
1
IMPORTANT NOTE
1
Most of the illustrations in this User's Guide show the MFC-J470DW.
Memory Storage
1
Your menu settings are stored permanently,
and, in the event of a power failure, will not be
lost. Temporary settings (for example,
Overseas Mode) will be lost. If you have
chosen Set New Default for your
preferred FAX
and COPY settings, those
settings will not be lost. However, you may
have to reset the date and time.
1
MFC models only
Volume Settings
(MFC models)
1
Ring Volume
1
You can choose a range of ring volume
levels, from High to Off. The machine will
keep your new default setting until you
change it.
While the machine is idle, press
d
or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level.
You can also change the volume through the
menu by following the instructions below:
Setting the Ring Volume from the
menu
1
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
General setup
1